LAUNCH CRP123 Supports Engine/ABS/SRS/Transmission Diagnostic Function

ENGINE:

Today’s engines are complex systems, using feedback loops from intake air temperature and flow, manifold absolute pressure, engine coolant temperature, crankshaft and camshaft position, oil pressure, fuel rail pressure, fuel tank pressure, vehicle speed and many other inputs to determine correct air/fuel ratios, camshaft timing, ignition timing and other, critical, operational parameters. The LAUNCH CRP123 OBD2 Scanner speeds diagnosis by providing the user access to critical OBD II standard data as well as extended, manufacturer specific, data on engine, fuel, emissions and performance parameters, at the touch of a button.

ABS:

Anti-skid braking system (ABS) The function is to automatically control the braking force of the brake when the car is braking, so that the wheels are not locked and in the state of edge rolling slip (slip rate is about 20%) so as to ensure the maximum adhesion between the wheels and the ground. LAUNCH Crp123 can scan this system and located the error part

AT(Transmission):

Auto Transmission is a set of transmission used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine. The transmission can produce different transmission ratios between the engine and the wheel during the driving process of the car

SRS:

Airbag Systems is a device that expands the airbag to protect the passenger before the second collision occurs. As an auxiliary device of occupant restraint device of seat belt, airbag is called Supplemental Restraint System (SRS)

LAUNCH CRP123 Supports Full OBD2 Code reader Scan Function

Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability

LAUNCH CRP123 Supports Graphing 4 in 1 live data for ENGINE / ABS/ SRS/ Tramsmission

This OBDII diagnostic scanner has big size LCD color screen .it also shows live vehicle sensors data in text,multiple graph format shows 4 live Readiness and allows you to focus on any suspicious or symptom-specific data parameters.

Launch CRP123 obd2 scanner can work on 10000+ cars ( 43 Brands )

For ACURA, For AUDI, For AUSTFORD, For BENZ, For BMW, For CHRYSLER, For CITROEN, For EUROFORD, For FIAT, For GM, For HOLDEN, For HONDA, For HYUNDAI, For INFINITI, For ISUZU, For JAGUAR, For KIA, For LAND ROVER, For LEXUS, For MAZDA, For MERCEDES, For MITSUBISHI, For NISSAN, For OPEL, For PEUGEOT, For PORSCHE, For RENAULT, For SAAB, For SCION, For SEAT, For SKODA, For SMART, For SPRINTER, For SUBARU, For SUZUKI, For TOYOTA, For USA FORD, For VOLVO, For VW

Why choose LAUNCH CRP123?

>>>>Portable, Faster, more Functional!

■ Four system diagnosis, accurate diagnosis data.

■ Portable and convenient, good quality and cost-effective.

■ Resistant to construction and fall, adapt to outdoor working conditions.

■ Simple operation, quick start, suitable for the basic needs of individual users.

■Support printing reports on PC through report sharing.

HOW TO REGISTER & UPDATE LAUNCH CRP123 ?

Step 1: Go to LAUNCH official website(refer to the "user manual" in the "Technical Specification "section of product webpage) and click Updating Tool Download icon.

Step 2: Download and install the CRP123 update tool and launch the program when installed.

Step 3: You will be prompted to type in the serial # (located on the back of the tool)

Step 4: Hit [Device Upgrade] to enter the register page, type your email info (check the "Register Code" on the device menu "Help--Tool Information" ).

Note: the “User password” is equal to the “Register Code.”

Step 5: Install the TF card from the tool into the supplied USB TF card adapter and insert into USB port of CPU.

Step 6: Reopen the CRP update Suite and select the updates you would like to preform or click select all and click Download.

Step 7: Once all steps are complete, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt you to upgrade, select OK button on tool to proceed.

Launch CRP123 is with Lifetime Free Update via Internet !

LAUNCH CRP123 Packing List:

1. LAUNCH CRP123 ODB II Scanner
2. USB Cable
3. OBD II Cable
4. Card Reader
5. User Manual
6. Installation / Registration Instructions